1,Single X or Y view and X & Y view simultaneously
2,Fiber core can be display clearly
3,Auto check quality of cleaved end face
4,Small bulk and light weight (bulk: 150mm x150mm x160mm ; weight :3.52kg)
5,Inner light to set fiber at night
6,Simple operation menu
7,9 seconds splice time and 30 seconds heat time
8,Auto select best splicing program
9,Storage of splice result: 5000 results &3 parameter per result

Applicable fibers: SM MM DS NZDS

Fiber cleaved length: 8-16mm

Fiber diameter: Cladding diameter 80-150um;Coating diameter 100-1000um;

Fiber Count: Single

Fiber aligning method: Core aligning

Retum loss:>60dB

Actual average splice loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)

Splicing mode: auto

Typical splicing time: 9 sec ,with standard SM fiber

Splicing mode: 12 (templet), 188(user)

Tube typical heating time: 30 sec

Protection sleeve length: 60mm, 40mm

Storage of splice result: 5000 results, 3 parameter per result

Tension test: 2N

Fiber magnification: 400X (X or Y view), 200X (X and Y view)

Electrode life: 2500

No. of splice/heating with battery: Typical 130 cycles

Image change over: The fiber image can be turned over

Display screen: 5 inch color LCD monitor

Terminal: RS232

Power supply: AC 100-240V with AC adapter inner Li-battery (6600mAH)

Operating condition: 0-5000m above sea level, -10-50'C Max wind velocity of 15m/s

Dimension: 150mm(L)X150mm(W)X160mm(H)

Weight: 3.52Kg including battery