1, Core to core alignment by PAS technology ( PAS:Profile Alignment System)
2, Digital fusion splicer with automatic focus function
3, Fiber core can be display clearly
4, Single X or Y view and X & Y view simultaneously
5, Auto detect cleaved endface fault

6, Display fiber cleaved and offset angle

7, Display core and clad offset

8, 5.6 inch TFT color LCD monitor with clear digital image display 

9, USB & VGA interface

10, Software upgrade via USB interface

Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)

Fiber cleaved length: 8~16mm (Coating diameter : 250um)

                   16mm (Coating diameter: 250 ~ 1000um)

Fiber diameter: Cladding diameter: 80 ~150um 

              Coating diameter: 100~ 1000um

Fiber Count: Single

Fiber aligning method: Core or clad aligning

Image processing method: Digital

Actual average splice loss: 0.02dB (SM), 0.01dB (MM)

                        0.04dB (DS), 0.04dB (NZDS)

Splicing time: Typical 9 sec, with standard SM fiber

Splicing mode: 53(templet), 40(user)

Splice loss estimate: More accurate

Return loss: >60dB

Storage of splice result: 4000 results,20 parameter per result

Fiber display and magnification: 300X(X or Y view),150X(X and Y view)

Tube heating time: Typical 30 sec

Tube heating mode: 9(templet), 24(user)

Tube heating temperature: Can be adjusted

Applicable Protection sleeve length: 60mm, 40mm and a series of micro sleeves

Tension test: 2N

Electrode life: 2500

No.of splice/heating with battery: Typical 150 cycles (splice/tube heat) with inner Li-battery

Display screen:5.6 TFT inch color LCD monitor

Image change over: The fiber image is turned upside down

Terminals: USB 1.1 and VGA

Operating condition: 0 ~ 5000m above sea level, 0~ 95%RH and -10~50'C, respectively, Max. wind velocity of 15m/s

Power supply: AC 100-240V with AC adapter; inner Li-battery(6600mAH)

Dimensions: 150 mm(L) x150 mm (W) x150mm (H)

Weight: 2.7 Kg excluding battery, 3.2 Kg including battery